Page 14
PUMP SAVER
Pump Saver
is a product that protects and
prolongs the life of the pump. This will keep
the internal parts of the pump lubricated and
protected from freezing while being stored in
ALL climates. It also assists with protection
from internal corrosion. You can visit your
local Menards store or order online at www
.
menards.com
Pump Saver Instructions
Follow the previous storage instructions for
your pressure washer
.
To prevent staining,
protect the surface under the pressure
washer from any excess fluid. Wear ear and
eye protection when using this product.
Turn unit off and disconnect the gun before
adding pump saver. Unscrew threaded top
from bottle to remove seal and reattach
threaded top to bottle. Remove black cap
from bottle.
1) Place top of pump saver bottle onto the
garden hose adapter.
2) Secure pump saver bottle by turning in a
clockwise direction.
3) Turn the power on.
4) Squeeze bottle to help it into the pump.
5) Turn power off when pump saver exits
the machine’s water outlet.
Note:
Instructions on Pump Saver Bottle are
generic and not model specific.
96048_IM_MFX2U2200.indd 1496048_IM_MFX2U2200.indd 14 2020/12/10 上午10:402020/12/10 上午10:40
To Next Page
Loading...
