Mass Charger 24/50-2, 24/75, 24/75 (120V), 24/100, 3-24/100, 48/25, 48/50 – User and Installation Manual
1 GENERAL INFORMATION
1.1 Use of this manual
This manual contains important safety and operating
instructions for the safe and effective operation,
maintenance and possible correction of minor
malfunctions of the Mass Charger. It is therefore obligatory
that every person who works on or with this product is
completely familiar with the contents of this manual, and
that he/she carefully follows the instructions and important
safety instructions contained herein.
1.2 Validity of this manual
All of the specifications, provisions and instructions
contained in this manual apply solely to standard versions
of the Mass Charger delivered by Mastervolt.
This manual is valid for the following models:
Mass 24/50-2 230V/50-60Hz
Mass 3-24/100 400V 3 phase
These models are further mentioned as “Mass Charger”.
Mastervolt offers a wide range of products for your
electrical installation. For an extensive overview of all our
products, please visit our website www.mastervolt.com.
1.3 Liability
Mastervolt can accept no liability for:
Consequential damage due to use of the Mass
Charger.
Use that is inconsistent with the purpose of the
product.
Possible errors in the manuals and their results.
Disclaimer: Our products are subject to continual
development and improvement. Therefore, additions or
modifications to the products may cause changes to the
technical data and functional specifications. No rights can
be derived from this document. Please consult our most
current Terms & Conditions of Sale.
1.4 Identification label
Part number Serial number K201R0010 with device version “R”
Figure 1. Identification label
The identification label is located at the right-hand side of
the Mass Charger. Important technical information
required for service and maintenance can be derived from
the identification label.
CAUTION!
Never remove the identification label.
1.5 Correct disposal of this product
This product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused. When this crossed-out
wheeled bin symbol is attached to a
product, it means the product is covered
by the European Directive 2012/19/EU.
Please be informed about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not
dispose of your old products with your normal household
waste.
To Next Page
Loading...
Need help?
General
