Matador EDGE GB0104 User Manual (English)

Questions and Answers:

J
Jennifer PerkinsAug 7, 2025
Why my Matador EDGE GB0104 barbecue will not light?
- A
  Alexis LeeAug 8, 2025
  If your Matador Grill won't light, several factors could be at play. First, ensure that the gas valve on the cylinder is open and that there are no obstructions in the burner ports or gas injectors. Secure all gas connections and correctly position each burner over its gas port. If the ignition system isn't sparking, the unit may require servicing. Also, make sure the burners are correctly assembled in the barbecue frame and that burner ports aren't blocked by spider webs or insect nests. Allow 5 seconds for the gas to flow through the burner before igniting.
L
Lauren RobinsonAug 12, 2025
What to do if my Matador Grill barbecue lights but goes out?
- M
  Mary LongAug 12, 2025
  If your Matador Grill lights but then goes out, check the fuel supply. Ensure the gas valve at the cylinder is turned on. If the gas cylinder is low or empty, replace it and perform a leak test. Also, inspect the gas hose for any kinks or twists that might be restricting gas flow. Windy conditions can also cause this issue, so position the barbecue away from direct wind.
C
Courtney MendozaAug 18, 2025
How to stop gas smell when lighting Matador EDGE GB0104 Grill?
- J
  johnny00Aug 18, 2025
  If you smell gas when lighting your Matador Grill, it could be due to a loose connection or a faulty part. Check that all connections are tight and perform a leak test of the gas line to ensure there are no gas leaks.