Need help?Do you have a question about the Matador PALLADIUM 4 BURNER and is the answer not in the manual?
Assemble base weight, door magnet panel, and plastic backing board on bottom cabinet panel using specified bolts, nuts, washers, and screws.
Assemble castors (with and without lock) onto the bottom cabinet panel using bolts, spring washers, and washers.
Attach door hinges (upper/lower) to the left and right side cabinet panels using bolts.
Assemble left, back, and right side cabinet panels onto the bottom cabinet panel using bolts.
Attach side support cabinet panel to the bottom panel using bolts.
Assemble the crossbeam onto the cabinet using bolts.
Attach the separation cabinet panel to the cabinet using bolts.
Assemble the left and right doors onto the cabinet by positioning pins.
Attach the hood handle to the hood using bolts.
Assemble the firebox onto the cabinet using bolts.
To Next Page
General
