Need help?Do you have a question about the Matador Outdoor Entertainer HS-KC003A and is the answer not in the manual?
General| Brand | Matador |
|---|---|
| Model | Outdoor Entertainer HS-KC003A |
| Category | Grill |
| Material | Stainless Steel |
| Burners | 6 |
| Additional Features | Warming Rack |
Official website for product information and support.
General precautions for safe operation and handling of the BBQ.
Specific guidelines for safe use of gas and gas cylinders.
Required distances from combustible materials for safe installation.
Emergency procedures for gas leaks and fires.
Guidelines for safe storage and handling of gas cylinders.
Ensuring proper condition and connection of gas hoses and regulators.
Procedures for safely connecting and disconnecting gas cylinders.
Actions to take in the event of a fire involving the BBQ.
Steps to follow if a gas leak is detected.
Prohibition against storing gas cylinders inside buildings.
Requirements for safe outdoor placement and ventilation.
Method for checking gas connections for leaks using soapy water.
Safety measures to keep children away from the hot BBQ.
Instructions for connecting and disconnecting the gas supply.
Initial preparation of the hotplate before first use.
Step-by-step guide for lighting the BBQ burners.
Specific instructions for igniting the rotisserie burner.
Steps to resolve issues with burners or ignition.
General advice on cleaning the BBQ components.
Procedures for maintaining the burners to prevent issues.
Understanding and addressing burner blowback.
How to properly clean the BBQ's drip tray.
Guidelines for storing the BBQ, covers, trolley, and wheels.
Recommendation for professional servicing by an authorized agent.
List of tools required for assembling the BBQ.
Inventory of all bolts, screws, and fittings included.
Important advice and precautions before starting assembly.
Assemble Left side cart bottom panel to front framework.
Assemble Left side cart back panel to bottom panel.
Assemble Left Side cart pipe R to the structure.
Assemble Left side cart plate L to the structure.
Assemble the Left side cart front plate.
Assemble left side cart plate R.
Assemble Left side cart shelf panel.
Assemble Right cart bottom panel onto front framework.
Assemble Right side cart back plate.
Assemble Left side cart pipe R.
Assemble Right side cart plate R.
Assemble right side cart M- plate.
Assemble Right side cart front plate.
Assemble Right side cart front plate.
Attach right side cart shelf panel 2.
Assemble right side cart shelf panel.
Attach left side cart with main body.
Connect side burner assembly to control unit.
Assemble the side burner onto the left side cart.
Insert the side burner grill and knob.
Attach left side cart table-board and bond granite top.
Insert the left lid.
Assemble the right side cart with Main body.
Assemble water faucet to the right side cart table board.
Attach left side cart table-board and bond granite top.
Assemble water pipe connection to sink and sink to table-board.
Assemble the back support plate.
Assemble the left side cart door.
Assemble the right side cart doors L and R.
Assemble bricks and iron heating plate.
Assemble cooking grid, keep warm dish, and cooking plate.
Screw the Rotisserie handle onto the assembly.
Latch the motor and insert the shaft.
Place cylinder into tray and connect regulator.
Terms and conditions that must be met for the warranty to be valid.
Requirements for proper installation to maintain warranty validity.
Procedures for making claims and contacting support in AU/NZ.
To Next Page
