EasyManua.ls Logo

MatchX M2 Pro - Product Specification; 3.1 Hardware Specification

MatchX M2 Pro
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Product specification
3.1 Hardware Specification
Feature Description
CPU NXP MCIMX6G2CVM05AB, 528MHz, Arm Cortex-A7
Memory 256MB DDR3 RAM/ 256MB NAND FLASH
Storage Memory Optional SSD up to 32GB or industrial SD-Card
LoRa Radio Two independent radio channels
SX1302 chipsets, 16 frequency channels
SF5-SF12, 27dBm output power
8 x 8 channels LoRa packet detectors per radio channel
Supports EU868, US915, AS920, AS923, AU915, KR920, IN865 regions
WiFi 2.412GHz 2.484GHz, IEEE 802 Part 11b/g/n (802.11b/g/n)
GPS UBlox Max 7Q GNSS receiver with additional LNA
Ethernet RJ45 10/100 Mbit LAN with 24V POE
Console through USB-C as virtual COM port
LEDs RGB LED status indicator
Interface USB-C with PD for console UART and Power
USB-A 2.0 Host
Reset Button
Internal Sensors 3-Axis Accelerometer
Pressure Sensor
Temperature Sensors
Voltage and Current monitoring
Antenna interface 4x SMA connectors, waterproof
Power Supply 24V DC passive PoE or USB-C PD rev 2.0 up to 22V
Power Consumption 3.5W in average, peak 6W
Operating Temperature -40
C to 85
C