7 MATRIX FITNESS SYSTEMS ENTERTAINMENT
CHAPTER 4 : PROGRAMMING THE TELEVISION & ADJUSTING THE SETTINGS
STEP 2: Press the “ENTER” button to advance to the channel setup heading.
STEP 3: Using the channel Çp buttons, highlight the “CaTV” setting then press the volume p
button. This will program the TV to receive all channels available to your facility.
* If the cable provider in your area uses HRC or IRC channel frequencies, repeat steps 1-3, but
highlight “HRC” or “IRC” instead of “CaTV.”
4.2 PICTURE SETTINGS
STEP 1: Press and hold the volume Ç button and the channel p button until the menu screen
appears.
* Picture settings is the first menu heading and will be on screen when you enter the setup menu.
STEP 2: Cycle through to the field that you want to modify using the channel Çp buttons and
when that field is highlighted, use the volume Çp buttons to adjust the setting.
4.3 ASPECT RATIO
STEP 1: Press and hold the volume Ç button and the channel p button until the menu screen
appears.
STEP 2: Press the “ENTER” button to advance to the aspect ratio heading.
STEP 3: Cycle through to the field that you want to modify using the channel Çp buttons and
when that field is highlighted, use the volume
Çp buttons to adjust the setting.
* Your 7” TV broadcasts in both 16:9 and 4:3 aspect ratio. Full is the 16:9 setting and zoom is 4:3.
4.4 CABLE BROADCASTING SYSTEM
STEP 1: Press and hold the volume Ç button and the channel p button until the menu screen
appears.
STEP 2: Press the “ENTER” button to advance to the cable broadcasting system heading.
STEP 3: Cycle through to the field that you want to modify using the channel Çp buttons and
when that field is highlighted use the volume
Çp buttons to adjust the setting.
* This TV has a global tuner and will broadcast NTSC358, NTSC443, PALM, PALN, PAL60,
PAL443 and SECAM COLOR SYSTEMS.
To Next Page
Loading...
Need help?
General
