MATRIX FITNESS SYSTEMS ENTERTAINMENT 10
CHAPTER 5 : BRACKET ASSEMBLY AND INSTALLATION FOR
CYCLES, ELLIPTICALS, ASCENT TRAINER AND STEPPER
STEP 4
Remove the chrome bolts (Z51) from
the console mast badge and pull the
power wire and coaxial cable from
inside the mast.
STEP 5
Connect the power wire and coaxial
cable from inside the mast to the
power wire and coaxial cable in the
bracket.
STEP 6
Mount the bracket to the console mast
using the chrome bolts (Z51) that
held the console mast badge in place.
STEP 7
Assemble the TV back cover to the
mounting bracket using the phillips
head machine screw (Z04).
FINAL ASSEMBLY
To Next Page
Loading...
