MATRIX FITNESS SYSTEMS ENTERTAINMENT 12
CHAPTER 6 : INSTALLATION ON THE T3x/T3xi TREADMILL
STEP 2
Remove the cover plate from
the console by removing the
machine screw. Pull the TV
power wire and coaxial cable
out of the console.
STEP 3
While holding the bracket, route
the coaxial cable and power
wire through the bracket as
shown. Fasten the bracket to
the console using the button
head socket screw (Z01) and
flat washer (Z02).
STEP 4
Assemble the TV back cover
to the mounting bracket using
the phillips head machine
screw (Z04).
FINAL ASSEMBLY
To Next Page
Loading...
