20
RECOMMENDED CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of your equipment.
Use a soft, clean cotton cloth. DO NOT use paper towels to clean surfaces on the climbmill. Paper towels are abrasive and
can damage surfaces.
Use a mild soap and damp cloth. DO NOT use ammonia based cleaner or alcohol. This will cause discoloring of the
aluminum and plastics it comes into contact with.
Do not pour water or cleaning solutions on any surface. This could cause electrocution.
Wipe the console, heart rate grip, handles, foot pads and handlebars after each use.
For cleaning 7xe and 7xi displays, use distilled water in an atomizer spray bottle. Spray distilled water onto soft, clean, dry
cloth and wipe display until clean and dry. For very dirty displays, adding vinegar is recommended.
CAUTION: Be sure to have proper assistance to install and move the unit in order to avoid injury or damage.
CHECK FOR DAMAGED PARTS
DO NOT use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Matrix
Fitness.
MAINTAIN LABELS AND NAMEPLATES.
Do not remove labels for any reason. They contain important information. If unreadable or missing, contact Matrix Fitness
Systems for a replacement. 1-866-693-4863, www.matrixfitness.com
MAINTAIN ALL EQUIPMENT
Preventative maintenance is the key to smooth operating equipment, as well as keeping the user’s liability to a minimum.
Maintain a clean area around the equipment, free from dust and dirt. Equipment needs to be inspected at regular intervals.
Defective components must be replaced immediately. Improperly working equipment must be kept out of use until it is repaired.
Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. Matrix
Fitness Systems will provide service and maintenance training at our corporate facility upon request or in the field if proper
arrangements are made.
To Next Page
Loading...
Need help?
General
