Need help?Do you have a question about the Matrix C7XE-05 and is the answer not in the manual?
General| Brand | Matrix |
|---|---|
| Model | C7XE-05 |
| Category | Fitness Equipment |
| Language | English |
Details the location for finding the serial number on the unit.
Provides essential safety guidelines and precautions for operating the equipment.
Specifies electrical requirements, circuit needs, and grounding for safe operation.
Explains how to access and use Manager Mode for customizing club settings.
Provides detailed wiring schematics for various components of the unit.
Continues detailed wiring schematics, illustrating connections between boards.
Troubleshoots error code 01AC related to ECB over current.
Troubleshoots error code 01AF indicating a disconnected electro-magnet (ECB).
Troubleshoots error code 02A0 related to encoder or speed sensor issues.
Troubleshoots DC brake errors (02BE/02BF) for movement in stop mode.
Troubleshoots DC brake errors (02C0) occurring in manual mode.
Troubleshoots speed tracking errors (02C1) indicating RPM deviation.
Troubleshoots Control Zone 3 IR sensor communication errors (02C2).
Troubleshoots frame IR sensor communication errors (02C3).
Addresses GUI loading and program start errors (03A5/03A6).
Troubleshoots issues loading video in the Virtual Active program (03A7).
Troubleshoots machine type setting mismatch with LCB or MCB (03A8).
Troubleshoots UCB communication errors (04A0) or disconnection.
Troubleshoots LCB communication response issues (04B0).
Diagnoses and resolves issues related to the console not receiving power.
Addresses problems with no heart rate reading or erratic heart rate display.
Continues troubleshooting heart rate issues, focusing on wiring and grip continuity.
Diagnoses and resolves problems with the grip toggle response and console feedback.
Further troubleshooting for toggle issues, checking wiring continuity and console function.
Comprehensive testing procedure after installation or part replacement.
Finalizes UCB software upgrade, including service mode checks and value recording.
Procedure for upgrading the Lower Control Board (LCB) software via USB.
To Next Page
