EasyManuals Logo
Home>Matrix>Fitness Equipment>CXM

Matrix CXM User Manual

Matrix CXM
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
MAINTENANCE SCHEDULE
ACTION FREQUENCY
Clean the indoor cycle using soft cloths or paper towels or other
Matrix approved solution (cleaning agents should be alcohol
and ammonia free). Disinfect the saddle and handlebars and
wipe off all bodily residues.
AFTER EACH USE
Make sure that the indoor cycle is level and does not rock. DAILY
Clean entire machine using water and a mild soap or other
Matrix approved solution (cleaning agents should be alcohol
and ammonia free).
Clean all exterior parts, the steel frame, front and rear
stabilizers, seat and handlebars.
WEEKLY
Test the emergency brake to make sure it is functioning
properly. To do this, press down the red emergency brake lever
while pedalling. When functioning properly, it should immediatly
slow down the ywheel until it comes to a complete stop.
BI-WEEKLY
Lubricate the saddle post (A). To do this, raise the saddle post to
the MAX position, spray with maintenance spray and rub down
the entire exterior surfaces with a soft cloth. Clean the saddle
slide (B) with a soft cloth and if necessary apply a small amount
of lithium/silicone grease.
BI-WEEKLY
Lubricate the handlebar post (C). To do this, raise the handlebar
post to the MAX position, spray with maintenance spray and
rub down the entire exterior surfaces with a soft cloth. Clean
the handlebar slide (D) with a soft cloth and if necessary apply a
small amount of lithium/silicone grease.
BI-WEEKLY
Inspect all assembly bolts and pedals on the machine for proper
tightness.
MONTHLY
MAINTENANCE
1. Any and all part removal or replacement must be
performed by a qualied service technician.
2. DO NOT use any equipment that is damaged and or has worn or broken parts.
Use only replacement parts supplied by your country’s local MATRIX dealer.
3. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for
any reason. They contain important information. If unreadable or
missing, contact your MATRIX dealer for a replacement.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to
smooth operating equipment as well as keeping your liability to a
minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance
or repair of any kind is qualied to do so. MATRIX dealers will provide service
and maintenance training at our corporate facility upon request.
B
A
D
C
ENGLISH

Other manuals for Matrix CXM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Matrix CXM and is the answer not in the manual?

Matrix CXM Specifications

General IconGeneral
BrandMatrix
ModelCXM
CategoryFitness Equipment
LanguageEnglish

Related product manuals