11
9.5 Storage
1. Empty the petrol tank using a petrol suction
pump.
Important: Do not empty the petrol tank in
enclosed areas, near re or when smoking.
Petrol fumes can cause explosions and re.
2. Start the engine and run it until the tank and
fuel line are completely empty and the engine
stalls.
3. Let the generator cool down.
4. Remove the spark plug and pour approx.
5. Pull the starter handle slowly several times to
coat the internal parts.
6. Screw the spark plug back in.
7. Store the generator in a well-ventilated, safe
place.
9.6 Transport
1. Wait until the generator has cooled down.
2. Always transport the generator in the upright
position.
10. Disposal and recycling
The generator is supplied in
packaging to prevent its being
damaged in transit. This packaging is
raw material and can therefore be
reused or can be returned to the raw
material system.
The generator and its accessories are made
of various types of material, such as metal and
plastic. Defective components must be disposed
of as special waste. Ask your dealer or your local
council.
To Next Page
Loading...
Need help?
General
