Need help?Do you have a question about the Matrix ETERNITY PE and is the answer not in the manual?
General| VoIP Channels | Up to 32 |
|---|---|
| Power Supply | 100-240V AC, 50/60Hz |
| Connectivity/Supported Protocols | SIP, ISDN |
| Supported Trunks | BRI, PRI, SIP |
| Supported Extensions | Analog, IP |
| Features | Auto Attendant, Call Forwarding, Call Transfer, Call Waiting, Conference, Voicemail, Music on Hold |
| Management | Web-based |
| Operating Temperature | 0°C |
| Humidity | 5% to 90% non-condensing |
Preparations required before installing the ETERNITY system.
Instructions for installing SLT, DKP, and TWT cards.
Procedure for installing the Basic Rate Interface (BRI) card.
Procedure for installing the E&M signaling card.
Instructions for installing the GSM/UMTS mobile card.
Procedure for installing the Voice over IP (VoIP) card.
Guide on connecting SIP-based extensions to the system.
Procedure for installing the T1/E1 PRI interface card.
Instructions for installing the Voice Messaging System (VMS) card.
Procedure for installing the Door Phone interface card.
Steps for powering on the ETERNITY system.
Guide to accessing the ETERNITY's programming interface.
Configuration of T1/E1 PRI interface parameters.
Configuration of mobile network interfaces.
To Next Page
