Need help?Do you have a question about the Matrix ETERNITY GE and is the answer not in the manual?
General| Scalability | Modular |
|---|---|
| Maximum Analog Extensions | Up to 64 |
| Analog Phones Support | Yes |
| Power Supply | 100-240VAC, 50/60Hz |
| Type | IP-PBX |
| VoIP Support | Yes |
| Features | Voicemail, Conferencing, Call Forwarding, Call Transfer |
| Voicemail | Yes |
| Management Interface | Web-based |
| IP Phones Support | Yes |
| Wireless Phones Support | Yes |
| Network Protocols | SIP, TCP/IP, RTP |
| Security | Firewall |
| Redundancy | Yes |
| Integration | CRM, ERP, PMS |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Dimensions | Varies based on configuration |
| Weight | Varies based on configuration |
| Power Consumption | Varies by configuration |
Lists essential items and conditions required before ETERNITY installation.
Describes VoIP card installation scenarios and network connections.
Explains how to connect SIP-enabled devices as SIP extensions.
Outlines the process and time required for system initialization after powering on.
Guides on connecting to and accessing the ETERNITY's web-based programming software.
Configuring emergency numbers and assigning trunk groups for routing.
Configuring connection types and network parameters for VoIP Ethernet ports.
Configuring SIP trunks, including Proxy SIP Trunk and ITSP details.
Configuring SIP extensions, including IP address, name, and authentication.
Instructions for changing the System Engineer password for security.
To Next Page
