Matrix MAGNUM MEGA POWER RACK

To Next Page

MAGNUM SERIES

MG-MR47-04 / MEGA POWER RACK

MAINTENANCE CHECKLIST

ACTION FREQUENCY

Clean Upholstery * Daily

Inspect Cables Daily

Clean Guide Rods Monthly

Inspect Hardware Monthly

Inspect Frame Bi-Annually

Clean Machine As Needed

Clean Grips * As Needed

Lubricate Guide Rods † As Needed

* Upholstery & Grips should be cleaned with a mild soap and water or

a non-ammonia based cleaner.

† Guide rods should be lubricated with Teon based lubricant. Apply the

lubricant to a cotton cloth and then apply up and down the guide rods.

PRODUCT SPECIFICATIONS

TECH SPECS

Maximum User Weight 181.5 kg / 400 lbs.

Maximum Training Weight 408.5 kg / 900 lbs.

Product Weight 347 kg / 765 lbs.

Overall Dimensions

(L x W x H)*

206 x 207 x 246.5 cm /

81” x 81.5” x 97”

Weight Horn Diameter

(Weight Plate Storage)

47.63 mm / 1.875”

* Ensure a minimum clearance width of 0.6 meters (24”) for access to

and passage around MATRIX strength equipment. Please note, 0.91

meters (36”) is the ADA recommended clearance width for individuals

in wheelchairs.

WARRANTY

For North America, please visit www.matrixtness.com

for warranty information along with warranty exclusions

and limitations.

PROPER USAGE

1. Do not exceed weight capacity of this

equipment.

2. If applicable, set safety stops to

appropriate height.

3. If applicable, adjust seat pads, leg

pads, foot pads, range of motion

adjustment, or any other type

of adjustment mechanisms to a

comfortable start position. Make

certain that the adjusting mechanism is

fully engaged to prevent unintentional

movement and to avoid injury.

4. Sit on bench (if applicable) and get into

appropriate position for exercise.

5. Exercise using no more weight than

you can safely lift and control.

6. In a controlled manner, perform

exercise.

7. Return weight to its fully-supported

start position.

Need help?

Do you have a question about the Matrix MAGNUM MEGA POWER RACK and is the answer not in the manual?

The Matrix Magnum Series MG-MR47-04 / Mega Power Rack is a robust strength training equipment designed for comprehensive workouts. Its primary function is to provide a secure and versatile platform for various exercises, including squats, bench presses, and pull-ups, by integrating a power rack structure with additional features for weight storage and chin-up exercises.

Function Description:

The Mega Power Rack serves as a foundational piece of equipment for free weight training. It features a sturdy frame with adjustable uprights that allow users to set safety stops and bar catches at appropriate heights for different exercises and user heights. This adjustability is crucial for ensuring user safety and accommodating a wide range of movements. The rack is designed to support heavy loads, making it suitable for advanced strength training. Integrated weight storage horns provide convenient and organized storage for weight plates, keeping the workout area tidy and safe. A chin-up bar is incorporated into the top structure, offering an additional exercise option for upper body strength and conditioning. The overall design emphasizes stability and durability, essential for a piece of equipment that handles significant weight and repetitive use.

Usage Features:

Proper usage of the Mega Power Rack is paramount for safety and effectiveness. Users should always adhere to the weight capacity limits of the equipment to prevent damage or injury. Before starting any exercise, it is critical to set the safety stops to the appropriate height. These stops act as a safeguard, preventing the bar from dropping too low and potentially injuring the user if a lift is failed. For exercises involving adjustable components like seat pads, leg pads, or range of motion adjustments (though less common on a power rack, the principle applies to any adjustable mechanism), users must ensure these are set to a comfortable starting position and fully engaged to prevent unintentional movement.

When performing exercises, users should sit on a bench (if applicable) and get into the correct position. It is advised to use no more weight than can be safely lifted and controlled, emphasizing proper form over excessive load. All exercises should be performed in a controlled manner, avoiding sudden or jerky movements. After completing an exercise, the weight should be returned to its fully-supported start position, typically the bar catches on the uprights.

The chin-up bar offers a versatile option for bodyweight exercises. Users should ensure a secure grip and perform movements in a controlled manner. The rack's design allows for the use of various accessories, such as resistance bands or specialized bars, further expanding its exercise capabilities. However, users must ensure that any accessories are compatible with the rack and used safely.

For exercises like squats, the adjustable stops are crucial. Users should remove weight from the lifting bar/sled to determine the lowest comfortable position that ensures no spinal compression. For other exercises, the lowest point of bar travel that is comfortable without the bar contacting the body should be determined. Both stop catches should then be positioned to stop the bar at this point, ensuring they are completely seated on the stop rods or catch plate. For squats performed on a Smith press (if applicable to a variant of this rack), the stops should never be placed below the height indicated on the equipment.

Maintenance Features:

Regular maintenance is key to ensuring the longevity, safety, and smooth operation of the Matrix Mega Power Rack. A comprehensive maintenance checklist outlines daily, monthly, and bi-annual tasks.

Daily Maintenance:
- Clean Upholstery: If the rack includes any upholstered components (e.g., a bench used with the rack), these should be cleaned daily with a mild soap and water solution or a non-ammonia based cleaner.
- Inspect Cables: Any cables on the equipment should be inspected daily for wear, fraying, or damage.
- Clean Grips: Hand grips should be cleaned daily using a mild soap and water solution or a non-ammonia based cleaner to maintain hygiene and prevent material degradation.
Monthly Maintenance:
- Clean Guide Rods: Guide rods (if present, typically for a Smith machine component or similar sliding mechanism) should be cleaned monthly.
- Inspect Hardware: All nuts, bolts, and fasteners should be inspected monthly to ensure they are tight and secure. Loose hardware can lead to instability and potential injury.
- Lubricate Guide Rods: If guide rods are present, they should be lubricated monthly with a Teflon-based lubricant. The lubricant should be applied to a cotton cloth and then wiped up and down the guide rods for even distribution.
Bi-Annual Maintenance:
- Inspect Frame: The entire frame structure should be inspected bi-annually for any signs of damage, cracks, or structural integrity issues.
As Needed Maintenance:
- Clean Machine: The overall machine should be cleaned as needed to remove dust, sweat, and debris, maintaining its appearance and hygiene.

Beyond these specific tasks, general preventative maintenance is crucial. Users should never use equipment that is damaged or has worn or broken parts. Only replacement parts supplied by a local Matrix dealer should be used. Labels and nameplates, which contain important safety information, should never be removed. If they become unreadable or missing, a replacement should be sought from the dealer.

Any adjustments, maintenance, or repairs should only be performed by qualified personnel. Matrix dealers can provide service and maintenance training. The equipment should be installed on a stable and level surface. For optimal stability and to prevent rocking or tipping, the manufacturer recommends securing all stationary Matrix strength equipment to the floor. This task should be performed by a licensed contractor, ensuring all anchor points can withstand a pull-out force of 750 lbs. (3.3 kN).

The equipment is designed for use in supervised areas where access and control are regulated by the owner. The owner is responsible for determining who is allowed to use the equipment, considering factors like reliability, age, and experience. This training equipment complies with EN 957-1, EN 957-2, and EN 957-4 standards for stability when used as intended.