13
MATRIX TREADMILL (MODELS WITH RUNNING BELT)
QUARTERLY
To clean under a treadmill:
• Press “Go” then press “Incline Up” until it has reached max incline
• Press the “e-stop” then unplug the treadmill from the floor/wall outlet and lay the cord over the motor cover onto the running belt (disconnect
coax if present as well)
• With two people, lift the back of the treadmill and roll back as far as you are able
• Clean area where treadmill was placed
• With two people, lift the back of the treadmill and roll back into its original position
• Plug in power cord (and coax if present), then lift the e-stop to reset the incline
To Next Page
Loading...
