4
FIG. 2FIG. 1
CARDIO EQUIPMENT
LEVELING EQUIPMENT: TREADMILLS
7 & 5 SERIES TREADMILLS
INSTRUCTIONS
Start with the leveling feet all the way up (turn clockwise). If the treadmill is not level, once placed, adjust the leveling feet by
turning counterclockwise (Fig.3). Tighten the jam nut on the leveling feet with an adjustable wrench.
ALL OTHER TREADMILLS
TOOLS NEEDED
• Medium-size adjustable wrench
INSTRUCTIONS
1. On the right side of the treadmill, just in front of the rear foot, you will find two leveling shims. Remove one or
both (Fig. 1).
2. Turn the treadmill on its side. Loosen the two bolts holding the rear foot to the frame. Slide one or both shims
between the frame and the top of the foot (Fig. 2).
TOOLS NEEDED
• 6 mm Allen socket and ratcheting wrench
FIG. 3
To Next Page
Loading...
