User Fan
High-power blower fan to cool the user, controlled during workouts by the console.
If the Frame DC Power Board located in the frame is faulty or not connected properly, the fan is disabled
and will not work.
Follow these steps to replace this part.
1. Remove the Console upper rear shroud.
2. Remove connector from UCB socket J24 (BLOWER). Clip any zipties needed.
3. Refer to the image for hardware to remove.
4. Install the Console upper rear shroud.
TouchXL reference: W90
Touch reference: W90
Console photo index: 2 (Touch or TouchXL)
Virtual Active (VA) microSD
This microSD chip stores all of the files for the Virtual Active (VA) program. If it is not properly inserted
or damages/corrupt, the VA workout will be absent from the console.
Follow these steps to replace this part.
1. Remove the Console upper rear shroud.
2. Remove the Fan Bracket.
3. VA microSD socket is on the reverse of the UCB, slightly left of the LVDS socket.
To Next Page
Loading...
