9
ASSEMBLY
PART 1: WEIGHT STACK DISASSEMBLY
STEP 1 | WEIGHT STACK INSTRUCTIONS & NOTES
ID DESCRIPTION QUANITY
1 M8 X 50L SHC 4
2 Top Cap 1
3 Left Front Shroud 1
4 Right Front Shroud 1
5 Rear Shroud 1
Machine must be assembled on a at and level oor.
• Disconnect rep counter wires during top cap removal (View A)
• Remove top cap and shrouds as shown
• Ensure that cable routing is as shown in View B
View A
View B
To Next Page
Loading...
