27
Using X.info to display CompressHD information
Monitoring your CompressHD card’s operating
temperatures
As shown in the X.info Hardware section, the CompressHD page displays the
current and maximum operating temperatures for your Matrox CompressHD
card. To avoid damage to your CompressHD system, make sure that you don’t
operate your CompressHD card at or near the maximum temperature for a
prolonged period of time. You should target your CompressHD card to operate at
least 10°C below the maximum operating temperature.
You should monitor the temperature of your CompressHD card periodically and
take measures as needed to lower the room temperature and/or improve the
ventilation in your CompressHD system. If needed, move your CompressHD
card to a PCIe slot in your computer that is not too close to another card that
generates heat, such as a display card.
Error notification
X.info provides temperature warnings and warnings for other possible
CompressHD hardware problems. Once X.info has detected a hardware problem,
the
Matrox X.info Notification dialog box will be displayed to give you details
of the problem and further instructions. You will not be able to close this dialog
box until the problem has been resolved.
To Next Page
Loading...
