24 Chapter 2: Hardware installation
CoaXPress LEDs
The four CoaXPress LEDs on the main bracket identify the state and activity of
connected devices.
The typical sequence of LED states is as follows:
Important If the sequence of LED states on your Matrox Radient eV-CXP is different from
this sequence, there could be a problem with your device or with data transfer.
Please refer to the CoaXPress LEDs section in Appendix B: Technical information
for the complete list of possible LED states.
Matrox Radient eV-CXP is
sensing for a PoCXP-
compliant device.
Matrox Radient eV-CXP is sending
power to the device, and is trying
to establish a connection.
Connection established.
No data is being transferred.
Data is being transferred.
Matrox Radient eV-CXP is booting.
Alternating red/orange,
slow flash
Orange, fast flash
Red, slow flash
Green, slow flash
Green, solid
Green, fast flash
Orange, solid
Matrox Radient eV-CXP is
sensing for a non-PoCXP
compliant device.
Matrox Radient eV-CXP is
trying to establish a connection
with the device, without sending
power to the device.
If PoCXP is enabledIf PoCXP is disabled
If the device is
PoCXP-compliant
If the device is
non-PoCXP
compliant
To Next Page
Loading...
