Board summary 51
• Supports coaxial cable lengths of up to 40 m running at 6.25 Gbits/sec.
• Supports frame and line-scan video sources. The minimum and maximum
number of pixels per line are 33 and 65535, respectively.
• Supports video sources with a Bayer color filter. Bayer-encoded data (GRBG,
GBRG, BGGR, or RGGB) is converted to RGB.
• Can convert 8- or 16-bit monochrome or 24- or 48-bit packed BGR data to
monochrome, packed or planar BGR, packed BGRa, or YUV (YUYV) format.
• Can perform horizontal or vertical flipping.
• Can subsample image data by integer subsampling factors of 1 to 16.
• Has 1, 2, or 4 Gbytes of DDR3 SDRAM. Total memory bandwidth of up to
8.5 Gbytes/sec.
• Supports external 5 V rotary encoders with quadrature output.
• Has up to 32 auxiliary signals (with the cable adapter brackets installed) that are
path independent; the auxiliary signals can be transmitted on any of the CoaXPress
links. Each auxiliary I/O connector provides the following number of signals:
- Three TTL auxiliary I/O signals (trigger or user-defined input signals, or
exposure or user-defined output signals).
- One LVDS auxiliary output signal (exposure or user-defined output signal).
- Two LVDS auxiliary input signals (trigger, quadrature, or user-defined input
signals).
- Two opto-isolated auxiliary input signals (trigger or user-defined input signals).
• Has four CoaXPress LEDs, one for each CoaXPress input connector, to identify
the status and activity of connected devices.
• Has four board status LEDs to indicate the status of each of the following: power,
board configuration, PCIe (Host) slot, and firmware.
To Next Page
Loading...
