Matrox TripleHead2Go Analog Edition - Page 26

26 Matrox TripleHead2Go – User Guide
If your monitor has a DVI connector, use a
DisplayPort to DVI adapter (sold separately)
to connect your monitor to the connector.
If your monitor has an HD-15 connector,
use a DisplayPort to HD-15 adapter (sold
separately) to connect your monitor to the
connector.
Your Matrox product is now connected. Restart your computer and install your Matrox software (see
“Installing your Matrox software”, page 29).
Monitor cable
(DVI)
DisplayPort to DVI
adapter