8 Matrox TripleHead2Go – User Guide
Connecting three monitors
Connection overview
Step-by-step connection setup
1
Turn off computer
Before you connect your Matrox product, make sure you shut down your system and turn off
your computer.
2
Attach the Matrox input cable
Attach one end of the cable provided with
your Matrox product to the connector on
your computer. Attach the other end of the
cable to the connector labeled
INPUT
on
your Matrox product.
If your graphics hardware has an HD-15
connector, use the Matrox HD-15 to HD-15
cable to connect your Matrox product.
Matrox input cable
(HD-15 to HD-15)
To Next Page