Matrox TripleHead2Go – User Guide 9
If your graphics hardware has a DVI connector, use the Matrox DVI to HD-15 cable to
connect your Matrox product.
3
Connect the first monitor
Use your monitor cable to connect your
preferred monitor to the connector labeled
CENTER
( ) on your Matrox
product.
4
Connect the second monitor
Use your monitor cable to connect your
second monitor to the connector labeled
LEFT
( ) on your Matrox
product.
5
Connect the third monitor
Use your monitor cable to connect your
third monitor to the connector labeled
RIGHT
( ) on your Matrox
product.
6
Connect the external power
supply
Attach one end of the power supply cable
provided with your Matrox product to the
power connector on your Matrox product.
Plug the power supply cord into an electrical
outlet.
To Next Page