Matrox TripleHead2Go Analog Edition - Page 35

Matrox TripleHead2Go – User Guide 35
Windows XP –
a Right-click your Windows desktop background, then click Properties Æ Settings .
b Move the Screen resolution slider to a stretched mode resolution (for example, 2400
× 600), then click
OK .
Windows 2000 –
a Right-click your Windows desktop background, then click Properties Æ Settings .
b Move the Screen area slider to a stretched mode resolution (for example, 2400 ×
600), then click
OK .
3 Restart your computer normally.
Problem Desktop isn’t stretched across monitors
(one of your displays is blank)
1
Cause A stretched display mode may not be selected.
1
Solution From the Matrox PowerDesk main interface, select a stretched mode. For more information,
see “Product information”, page 39.
2
Solution Try reconfiguring your multi-display setup by running the Matrox setup wizard. For more
information, see “Accessing PowerDesk”, page 31.
2
Cause Laptop users only – Your secondary display may not be enabled in Windows.
1
Solution Make sure your display is enabled:
Windows 7 –
1 Right-click your Windows desktop background, then click Screen resolution .
2 Select any disabled display, choose Extend these displays , then click Apply .
Windows Vista –
1 Right-click your Windows desktop background, then click Personalize Æ Display
Settings
.
2 Select any disabled display, enable the Extend the desktop onto this monitor check box,
then click
Apply .
Windows XP/2000 –
1 Right-click your Windows desktop background, then click Properties Æ Settings .
2 Select any disabled display, enable the Extend my Windows desktop onto this monitor
check box, then click
Apply .