matson BT900 - MANAGING SURFACE CHARGE; COMPLETING THE TEST AND READING RESULTS

DIGITAL BATTERY TESTER
| 9BT900
BATTERY TEST
A. Follow the instructions indicating when to turn the headlights on and o or apply a
load into the battery.
In Vehicle:
Out Of Vehicle:
SURFACE CHARGE IN VEHICLE?
YES
SURFACE CHARGE IN VEHICLE?
NO
TURN HEADLIGHTS ON FOR 15 SECS
TESTING
TESTING
IS BATTERY CHARGED?
YES/NO
B. The tester will resume testing after it detects that the surface charge is removed.
10. Test the battery for few seconds.
11. Press the
/ key to select battery fully charged or not if tester asks. Press
«ENTER» to conrm choice.
12. When the test is completed, the display shows the actual volts and the actual
CCA and internal resistance. {Press the
/ key to read: SOH (STATE OF HEALTH)
and SOC (STATE OF CHARGE)}.