Warning
1. This product is designed to charge batteries only. It cannot
be used as a power supply.
2. This charger is designed to work with the following
batteries:
a. Lead Acid Cell
b. NiMH Cell
c. Enclosed Cell
3. Do not use batteries with a different voltage then that of
the charger.
4. Do not operate this charger in direct sunlight and in
environments of high humidity.
5. If the LED does not change to green after charging for a
long period of time, the battery may be damaged.
6. The charger uses an aluminium housing which can reach
temperatures of 50°C and over. To prevent injury, do not
touch the charger while it is in use.
7. Check that the AC input voltage is within the voltage range
of the charger.
To Next Page
Loading...
