What to do if the red light flashes 5 times on my matson MA4INONE?
If the red light on your Matson Battery Charger flashes five times, it indicates that the internal temperature is too high. Allow the unit to cool down, and it will restart automatically.
Why does the red light flash 3 times on my matson MA4INONE?
If the red light on your Matson Battery Charger flashes three times, it means the battery voltage is either too high or too low. Check the battery voltage and select the correct setting on the charger.
What to do if the red light flashes 2 times on my Matson Battery Charger?
If the red light on your Matson Battery Charger flashes twice, it means that the charger isn’t connected to the battery or the DC fuse is broken. Connect the battery. If there is no response, check the fuse.
What to do if the red light flashes 4 times on my matson MA4INONE?
If the red light on your Matson Battery Charger flashes four times, it indicates that the thermal sensor has shorted out. The thermal sensor is broken. Please return to distributor.
Explains status codes for Yellow and Green LEDs during charging modes.
Details Red LED flash patterns, their causes, and solutions.
Key notes on charging settings, full charge indication, and disconnection procedure.
Lists warnings on product use, battery compatibility, operating environment, temperature, and voltage.
Outlines warranty terms, consumer rights, and provides contact details for support.
General| Brand | matson |
|---|---|
| Model | MA4INONE |
| Category | Battery Charger |
| Language | English |
To Next Page
