46
Mode can greatly improve the display speed. Disable this item
if your graphics display card does not support this feature.
AGP Driving Control (Auto)
This item is used to signal driving current on AGP cards to
auto or manual. Some AGP cards need stronger than normal
driving current in order to operate. We recommend that you
set this item to the default.
•
AGP Driving Value:
When AGP Driving Control is set
to Manual, use this item to set the AGP current driving
value.
AGP Fast Write (Disabled)
This item lets you enable or disable the caching of display data
for the video memory of the processor. Enabling this item can
greatly improve the display speed. Disable this item if your
graphics display card does not support this feature.
AGP Master 1 WS Write (Disabled)
This implements a single delay when writing to the AGP Bus.
By default, two-wait states are used by the system, providing
greater stability.
AGP Master 1 WS Read (Disabled)
This implements a single delay when reading to the AGP Bus.
By default, two-wait states are used by the system, allowing
for greater stability.
Press <Esc> to return to the Advanced Chipset Features page.
To Next Page
Loading...
