Mattei BLADE Series User Manual

12.01
TI013G0008
Cleaning the drain solenoid
valve fi lter
Confi rm all pressure has been re-
moved from the condensate separator hou-
sing. Unscrew the connection and remove
the drain solenoid valve.
Withdraw the solenoid valve fi lter using
beak pliers, remove any dirt and wash with
detergent.
Re-assemble in the reverse order while
paying special attention to the position of
the solenoid valve seal.
Condensate Unload in
Optional Kit

Mattei BLADE Series Specifications

General

Series	BLADE
Voltage	380-480V, 50/60Hz
Cooling	Air-cooled
Drive	Direct Drive
Dimensions	Varies by model
Weight	Varies by model
Control System	Electronic Controller (various options available)