Need help?Do you have a question about the Mattei BLADE 7-TM and is the answer not in the manual?
Procedures for installing and bringing the machine online.
Guidelines for safe and correct machine operation.
General safety guidelines for machine use and maintenance.
Identifies potential hazards and safety measures.
Safety considerations during machine installation.
Safety rules for performing maintenance operations.
Explains safety symbols used on the machine.
Explains the mechanical and air flow operation of the compressor.
Details the microprocessor control unit for compressor management.
Requirements for connecting the compressor to power.
Function and proper use of the emergency stop.
Overview of the controller's functions and interface.
Pre-operation checks for electrical and oil systems.
Procedures for starting and stopping the compressor.
Schedule of regular inspections and tightening procedures.
Procedure for changing oil and oil filter.
Further details on oil change procedures and first change.
Warnings regarding oil handling, storage, and mixing.
Table of common problems, causes, and solutions.
Diagnosing and resolving overheating and noisy operation.
Steps for safely deactivating the machine.
Procedures for installing and bringing the machine online.
Guidelines for safe and correct machine operation.
General safety guidelines for machine use and maintenance.
Identifies potential hazards and safety measures.
Safety considerations during machine installation.
Safety rules for performing maintenance operations.
Explains safety symbols used on the machine.
Explains the mechanical and air flow operation of the compressor.
Details the microprocessor control unit for compressor management.
Requirements for connecting the compressor to power.
Function and proper use of the emergency stop.
Overview of the controller's functions and interface.
Pre-operation checks for electrical and oil systems.
Procedures for starting and stopping the compressor.
Schedule of regular inspections and tightening procedures.
Procedure for changing oil and oil filter.
Further details on oil change procedures and first change.
Warnings regarding oil handling, storage, and mixing.
Table of common problems, causes, and solutions.
Diagnosing and resolving overheating and noisy operation.
Steps for safely deactivating the machine.
General| Model | BLADE 7-TM |
|---|---|
| Category | Air Compressor |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Max Pressure | 10 bar |
| Motor Power | 7.5 kW |
To Next Page
