MAX power COMPACT RETRACT 12 V User Manual

2
TABLE OF CONTENTS
1
Positioning of Unit
4
2
Location of Auxiliary Equipment
4
3
Mechanical installation General
5
3.2
Determining & Marking up Position
6
3.3
Construction of the Hull Opening & Closing Plate
7
3.4
Final Fitting of the Mounting Base to the Hull
8
3.5
Final Fitting of the thruster Unit to the Mounting Base
8
3.6
Fitting of Hull Closing Plate
10
3.7
Final Adjustment and Set-Up of Thruster Unit
11
4
Electircal Installation (General)
11
4.2
Control Panel Installation
11
4.3
Control System
12
4.4 Control Panel & Thruster Control Box fucntions & Modes of Operation
13
a)
General Remarks
13
b)
Manual Mode
13
c)
Automatic set-up Mode
14
d)
Normal Operation Mode
14
4.5
Battery Requirements
16
4.6
Power Cable Sections (battery to Relay)
16
4.7
Power Fuse
17
5
Operation Limitations
17
6
Basic Maintenance
18
DIAGRAMS
1)
Build Diagram
19
2) Wiring of Control Box
20
3)
Control Wiring
21
4)
Power Cable Connections
22
5)
Warranty Terms
25
Your thruster is a highly technical product and should be treated as such. The employment of
a qualified marine personnel, with bow and stern thruster installation experience is strongly
adviced. Where possible, the boat manufacturers architect, design departments and/or
shipyard should be consulted, prior to installation taking place. For any boat requiring official
classification, bodies of approval should also be consulted at the earliest opportunity.
Your thruster should be delivered with the following parts:
Thruster assembly with integrated
Plaque for closing
Directional RelayBox
Control Box
thrusters motor, up / down motor,
plate (kit)
motor coupling, leg and propellers
Control Panel (Grey)
25m Control Cable
Manual

MAX power COMPACT RETRACT 12 V Specifications

General

Brand	MAX power
Model	COMPACT RETRACT 12 V
Category	Outboard Motor
Language	English