- 9 -
The Contents of Setting Item
[Machine Mode1]
[Year]
[Holiday] [Password]
[Machine Mode2] [Month, Date] [Special Day] [Time Length]
[Pay Closing Date] [Hour, Minute] [LST]
[Time Signal 1]
[60 or 100 scale] [IN1]
[Daily Total Hours] [Time Signal 22]
[OUT3]
[OST]
[LCD Display]
[IN1 for Special Day]
[OST for Special Day]
[Starting Date of Day Light Saving Time]
[Ending Date of Day Light Saving Time]
◆ After pressing “SET” key, all changed data in each mode are registered and the display re-
turns to the start of setting mode( symbol appears on the display.).
◆ Alternatively, you can press “
(FORWARD)” key in last setting item to register all changed
data, and then the display returns to the start of setting mode.
1. When selecting "3(Without Daily Total Hours function)" in Machine Mode 1
setting (CODE 01 in MODE 1), Daily Total Hours setting (CODE 05 in MODE1)
is not displayed.
2. When setting no Special Day in Special Day setting (CODE 02 in MODE 3),
“CODE 11” to “CODE 17” are not displayed.
Code No.
Setting data
To Next Page
Loading...