To Next PageTo Next Page
Need help?Do you have a question about the Max NF565/16 and is the answer not in the manual?
Mandatory use of safety glasses or goggles to protect eyes from hazards.
Necessity of hearing protection in noisy work environments to prevent damage.
Keep body parts away from discharge, avoid scaffolds, and control trigger use.
Use correct air pressure, specified fasteners, and proper discharge placement.
Use only air compressors and operate within specified pressure ranges.
Control trigger use, point discharge safely, and load fasteners correctly.
Guidelines for driving near edges, on other fasteners, and in elevated places.
Ensure controls work, assume fasteners are loaded, and avoid horseplay.
Covers general tool handling, storage, and proper disposal of parts and machine.
Identification of parts and specifications like height, width, and weight.
Details on compatible nail sizes, wire gauge, and air fittings.
Includes operating pressure, noise levels, and vibration characteristics.
Lists common uses such as casings, paneling, and furniture assembly.
Guidance on compressor, filter, regulator, oiler, and hoses.
Details on the required 1/4" N.P.T. plug and hose dimensions.
Importance of clean air and lubrication for tool performance and longevity.
Checklist for safety gear, air supply, and tool functionality before use.
Steps for loading fasteners, connecting air, and verifying tool operation.
Instructions on how to safely drive fasteners with the tool.
Procedure for switching between Sequential Trip and Contact Trip.
Procedure to adjust the fastener driving depth using the dial.
Guidance on applying the contact tip for specific material applications.
Locating the production year from the product number on the grip.
Checks for filter, lubricator, screws, and avoiding firing when empty.
Importance of using the recommended oil and a 3-piece airset.
Coating parts, avoiding cold, and keeping in a dry, safe place.
Troubleshooting and repairs should be handled by authorized personnel only.
General
