To Next PageTo Next Page
Need help?Do you have a question about the Max NF255FA/18 and is the answer not in the manual?
General| Operating Pressure | 70-120 psi |
|---|---|
| Magazine Capacity | 100 nails |
| Weight | 2.9 lbs |
| Power Source | Pneumatic |
| Nail Size | 18 Gauge |
| Fastener Type | Nails |
Provides a general introduction to the manual and highlights the importance of safety.
Emphasizes reading all instructions and warnings to prevent serious injury.
Lists and identifies the main parts of the tool (Frame, Trigger, etc.).
Details product numbers, dimensions, weight, capacity, pressure, and air consumption.
Shows nail sizes and wire gauges for different models.
Provides A-weighted sound power and pressure levels for the tool.
Lists vibration characteristic values and uncertainty for the tool.
Lists typical applications for the nailer, such as framing and assembly.
Explains how to find the production year using the product number.
Details the required air plug size and general coupling requirements.
Specifies the recommended operating pressure range and maximum limits.
Defines the minimum diameter and maximum length for the supply hose.
Emphasizes using clean, regulated compressed air and maximum pressure limits.
Describes the benefits and use of an air filter, regulator, and oiler.
Lists essential checks before operating the tool, including safety gear and air leaks.
Step-by-step guide for loading nails into the NF255FA/18 model.
Step-by-step guide for loading nails into the NF565A/16 model.
Explains how to adjust the nail driving depth using the dial.
Describes when and how to attach the contact tip for soft materials.
Provides safety warnings and steps to remove jammed nails.
Explains how to change the direction of the exhaust air by rotating the cover.
Illustrated breakdown of the NF255FA/18 model with part references.
Lists parts 1-42 for the NF255FA/18 model with item numbers and descriptions.
Lists parts 44-101 for the NF255FA/18 model.
Lists parts 70-102 for the NF255FA/18 model.
Illustrated breakdown of the NF565A/16 model with part references.
Lists parts 1-39 for the NF565A/16 model with item numbers and descriptions.
Lists parts 40-81 for the NF565A/16 model.
Lists parts 82-102 for the NF565A/16 model.
Illustrated breakdown of the NF665A/15 model with part references.
Lists parts 1-40 for the NF665A/15 model with item numbers and descriptions.
Lists parts 41-82 for the NF665A/15 model.
Lists parts 83-102 for the NF665A/15 model.
Declares the product's compliance with EC essential health and safety requirements.
Declares the product's compliance with UK health, safety, and environmental legislation.
Notes on manual changes and provides contact information for MAX Europe and USA.
