Max NF665/15 User Manual

NF665/15
15 GA. FINISH NAILER
15. CLOUEUR DE FINITION A ANGLE DE 15 Ga
CLAVADORA DE ACABADO ANGULAR DE CALIBRE 15
OPERATING AND MAINTENANCE MANUAL
MANUEL D'UTILISATION ET D'ENTRETIEN
MANUAL DE OPERACIONES Y MANTENIMIENTO
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN-
STRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
AVANT D’UTILISER CET OUTIL, LIRE CE MANUEL ET LES CONSIGNES DE SÉCURITÉ AFIN DE
GARANTIR UN FONCTIONNEMENT SÛR.
CONSERVER CE MANUEL EN LIEU SÛR AVEC L’OUTIL AFIN DE POUVOIR LE CONSULTER UL-
TÉRIEUREMENT.
ANTES DE UTILIZAR ESTA HERRAMIENTA, LEA DETENIDAMENTE ESTE MANUAL PARA FAMILIARIZARSE CON
LAS ADVERTENCIAS E INSTRUCCIONES DE SEGURIDAD.
CONSERVE ESTAS INSTRUCCIONES JUNTO CON LA HERRAMIENTA PARA FUTURAS CONSULTAS.
WARNING
AVERTISSEMENT
ADVERTENCIA

Max NF665/15 Specifications

General

Brand	Max
Model	NF665/15
Category	Nail Gun
Language	English

Summary

General Safety Warnings

Personal Protective Equipment (PPE)

Mandates wearing safety glasses/goggles and hearing protection in noisy environments.

Safety Warnings

Power Source and Air Pressure Guidelines

Use only compressed air and maintain pressure within the 70-100 p.s.i. range.

Operational Safety Precautions

Avoid flammable substances, explosive atmospheres, and keep body parts clear of discharge.

Tool Integrity and Maintenance Safety

Use correct fittings, disconnect when idle, check screws, and avoid scaffolding use.

Instructions for Operation

Fastener Driving Procedures

Details safe practices for driving fasteners, including trigger use and pointing the outlet.

Fastener and Tool Handling

Covers using specified fasteners, proper placement, and handling in specific situations.

Maintenance and Troubleshooting

Maintenance and Production Year

Provides guidance on maintenance, oil usage, and identifying the production year.

Storage and Repairs

Details proper storage conditions and directs repairs to authorized specialists.

Specifications and Technical Data

Tool Specifications and Air Fittings

Lists product specifications, recommended operating pressure, and air fitting requirements.

Technical Data: Noise and Vibration

Provides noise and vibration level data for the tool.

Brad Nail Specifications and Applications

Details compatible brad nail sizes and lists common applications for the tool.

Air Supply and Connections

Air Supply Setup and Components

Explains the air supply system, including compressor, filter, regulator, and oiler.

Hose and Fitting Requirements

Specifies hose dimensions, length, and fitting requirements for safe connection.

Operation and Testing

Nail Loading Procedure

Step-by-step instructions for loading finish nails into the magazine.

Test Operation and Air Hose Connection

Guides on performing a test operation and connecting the air hose safely.

Driving Fasteners and Adjustments

Sequential vs. Contact Trip Modes

Explains how to switch between sequential and contact trip modes for driving fasteners.

Driving Depth Adjustment

Details how to adjust the driving depth for fasteners using the adjustment dial.

Clearing Jammed Nails and Contact Tip

Procedure for Clearing Jammed Nails

Provides step-by-step instructions for safely clearing jammed nails from the tool.

Contact Tip Usage and Adjustment

Explains when and how to use and adjust the contact tip for different materials.