Need help?Do you have a question about the Max SuperLocator SN438J and is the answer not in the manual?
Identifies the main components of the metal connector nailer, referencing Fig.1 for visual aid.
Details product number, dimensions, weight, loading capacity, operating pressure, and air consumption.
Lists product number, nail length, shank diameter, head diameter, collation angle, and head type.
Provides technical data on noise (LWA, LpA) and vibration (total value) with associated uncertainties.
States the primary application of the tool, which is metal connecting.
Explains how to determine the production year from the product's serial number.
Details air fittings, operating pressure range, hose requirements, supply source, and 3-piece airset components.
Lists essential checks before operating the tool, including safety gear and tool functionality.
Step-by-step guide on how to load nails into the magazine and prepare the pusher.
Instructions for verifying the tool's functionality and safety mechanisms before actual use.
Guidance on proper technique for driving fasteners into metal connectors, including safety precautions.
Procedure for safely removing jammed nails, including required tools and safety warnings.
To Next Page
General
