Max SuperFramer CN890F2 User Manual

OPERATING AND MAINTENANCE MANUAL
MANUEL D'UTILISATION ET D'ENTRETIEN
MANUAL DE OPERACIONES Y MANTENIMIENTO
CN890F2
PNEUMATIC FRAMING COIL NAILER
DISPOSITIVO NEUMÁTICO DE CLAVETEADO
DE BOBINA DE TEJADO
CLOUEUR A BOBINE DE TOITURE PNEUMA-
TIQUE
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN-
STRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
AVANT D’UTILISER CET OUTIL, LIRE CE MANUEL ET LES CONSIGNES DE SÉCURITÉ AFIN DE
GARANTIR UN FONCTIONNEMENT SÛR.
CONSERVER CE MANUEL EN LIEU SÛR AVEC L’OUTIL AFIN DE POUVOIR LE CONSULTER UL-
TÉRIEUREMENT.
ANTES DE UTILIZAR ESTA HERRAMIENTA, LEA DETENIDAMENTE ESTE MANUAL PARA FAMILIARIZARSE CON
LAS ADVERTENCIAS E INSTRUCCIONES DE SEGURIDAD.
CONSERVE ESTAS INSTRUCCIONES JUNTO CON LA HERRAMIENTA PARA FUTURAS CONSULTAS.
WARNING
AVERTISSEMENT
ADVERTENCIA

Max SuperFramer CN890F2 Specifications

General

Brand	Max
Model	SuperFramer CN890F2
Category	Power Tool
Language	English

Summary

Signal Word Definitions

Warning Definition

Defines WARNING as a potentially hazardous situation leading to death or serious injury if not avoided.

Caution Definition

General Safety Warnings

Eye Protection

Emphasizes wearing safety glasses or goggles to prevent eye injuries from dust or flying fasteners.

Safety Warnings and Precautions

Power Source and Air Pressure

Do not use non-air sources; operate within 70-100 PSI, not exceeding 120 PSI.

Safe Handling and Environment

Keep body away from discharge, avoid flammable/explosive atmospheres, and don't use on scaffolds/ladders.

Tool Usage and Maintenance Checks

Additional Safety Guidelines

Safe Trigger and Discharge Practices

Avoid touching the trigger unless driving, never point discharge at people, and ensure proper outlet placement.

Fastener and Workpiece Handling

Operational Integrity and Environment

Air Supply and Connections

Power Source Requirements

Mandates using only compressed air from an air compressor, not other gases.

Operating Air Pressure Range

Specifies operating pressure between 70-100 PSI (5-7 bar) and a maximum of 120 PSI (8 bar).

Flammable Substances and Fittings

Instructions for Operation

Before Operation Checks

Includes verifying safety glasses, air supply, screw tightness, and contact arm/trigger function.

Operating Safety Precautions

Reiterates eye protection and keeping hands away from the discharge outlet during use.

Nail Loading and Test Operation

Nail Loading Procedure

Test Operation Steps

Driving Depth Adjustment