10
3 Refer to the mark on the Contact Arm area for direction to
turn the Adjustment dial.
4 Reconnect air supply.
TRIGGER LOCK MECHANISM
The tool is equipped with a trigger lock mechanism. Push and ro-
tate the Trigger Lock Dial to the trigger free position before driving
nails.
CHANGING THE HOOK DIRECTION
ALWAYS disconnect air supply before changing
the hook direction.
The hook can be directed in the two direction. Re-
move the hexagon socket cap screw with hexagon
wrench, change the direction, and then, put back the
bolt to reassemble.
To Next Page
Loading...
