MAXA MI Series - Connective and drain pipe installation

Hydronic Highwall
20 Installation
appropriate mounting screws.
 Fix the installation board on the wall.
Right installation
False installation
Drilling a hole
 Determine the pipe hole position using the installation board, and drill the pipe hole (N95mm) so it slants
slightly downward.
 Always use a wall hole conduit when piercing metal lath, ply wood or metal plate.
13.4.3 Connective and drain pipe installation
Drain pipe installation
 Run the drain hose sloping downward. Do not install the drain hose as illustrated below.
 When connection extended drain hose, insulate the connecting part of extended drain hose with a shield
pipe.
Connection pipe installation
mounting
board
of indoor unit
horizontal line
Tow Screw
Tow Screw
mounting
board
of indoor unit
horizontal line
mounting board
of indoor unit
horizontal line
Do not form a rise
Do not put the hose
end into water
Shield pipe
Wall
Drain hose
Extended drain hose