What to do if my MAXA N-P35A2 Air Conditioner does not start?
If your MAXA Air Conditioner doesn't start, check the following: * Ensure the power supply is properly connected. * Make sure the power plug is tightly inserted. * If the issue persists, the power plug or socket may be malfunctioning and need replacement. * Also, the fuse might be broken and require replacement by a maintenance professional.
Why is my MAXA Air Conditioner not cooling enough?
If your MAXA Air Conditioner isn't cooling enough, it could be due to a couple of reasons: * If the room temperature is lower than the set temperature, this is normal operation. * The evaporator might be frosting. In this case, the unit is in defrosting operation and will resume normal operation after defrosting is complete.
What does F1 error mean on MAXA Air Conditioner and how to fix it?
The "F1" error on your MAXA Air Conditioner indicates a malfunction of the evaporator temperature sensor. Check if the indoor room temperature sensor is properly connected.
How do I troubleshoot F2 error on MAXA N-P35A2 Air Conditioner?
The "F2" error code on your MAXA Air Conditioner signals a malfunction of the evaporator temperature sensor. Check if the evaporator temperature sensor is properly connected.
How to fix H8 error on MAXA Air Conditioner?
The "H8" error code on your MAXA Air Conditioner indicates that the water tank is full. Empty the water tank to resolve this issue. If the error persists after emptying the tank, contact a maintenance professional.
What to do if MAXA N-P35A2 shows F4 error?
If your MAXA Air Conditioner displays the "F4" error, it could be due to several reasons: * The wiring terminal between the outdoor condenser temperature sensor and the controller may be loose or poorly connected. Try removing the temperature sensor and re-inserting it to ensure it's stable. * There might be a short circuit due to tripped parts on the controller. Inspect the circuit on the controller. * The outdoor condenser temperature sensor could be damaged and need replacement. * The main board might be broken, requiring repair and replacement.
Why is there no cool wind in DRY mode on my MAXA N-P35A2 Air Conditioner?
If there is no cool wind in DRY mode on your MAXA Air Conditioner, the evaporator may be frosting. The unit will run in defrosting operation and resume normal operation after defrosting.
How to select modes (Cool, Heat, Fan, Dry, Auto) and adjust fan speed.
Step-by-step guide for installing the unit in a double-hung sash window.
Detailed steps for double-hung sash window installation.
Detailed steps for sliding sash window installation.
Solutions for when the unit won't start or fails to cool effectively.
Explains error codes (E, H8, F1, F2, F4) and water tank full messages.
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Power Supply | 220-240V, 50Hz |
| EER | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Air Flow (Indoor) | 550 m³/h |
| Weight (Outdoor Unit) | 28 kg |
| Type | Split |
| Cooling Power | 3500 W |
| Energy Efficiency Ratio (EER) | 3.21 |
| Noise Level | 42 dB |
| Noise Level (Outdoor) | 52 dB |
| Noise Level (Indoor) | 42 dB(A) |
To Next Page
