MAXA MI Series - Page 7

Hydronic Highwall
6 Specifications
Specifications
Model
MI42A
Air flow
H/M/L m
3
/h 850/720/640
H/M/L CFM 500/420/380
Cooling
Capacity H/M/L kW 4.25/3.85/3.32
Water flow rate H l/h 731
Water pressure drop H kPa 31.8
Heatin
g
Capacity H/M/L kW 5.81/5.17/4.43
Water pressure drop H kPa 30.2
Power supply
V/ph/Hz
220-240/1/50
Power input
H W 50
Sound pressure level
H/M/L dB(A) 39/33/28
Fan motor
Type Low noise 4-speed fan motor
Quantity 1
Fan
Type Cross-flow fan
Quantity 1
Coil
Row 2
Max. Working pressure Mpa 1.6
Diameter mm Φ7
Body
Dimensions W×H×D mm 1072×230×315
Net weight kg 15.8
Packing W×H×D mm 1180×315×415
Gross weight kg 19.4
Pipe
connection
Water inlet/outlet pipe Inch G3/4"
Drain pipe mm ODΦ20
Controller
R51/E (standard)
Note:
1. H: high speed; M: medium speed; L: low speed
2. Cooling Conditions: entering water 7°C, temperature rise 5°C, entering air temperature 27°C DB,19°CWB.
Heating Conditions: entering water 50°C, enter air temperature 20°C, the same water flow as the cooling conditions.
3. Noise is tested in semi-anechoic test room.