Charging Battery
Important! Only the battery included in the set should
be used. Using other batteries might damage the phone
and shall void warranty.
Never plug in the charger while the back cover is
removed.
To charge the phone:
1. Plug the charger into a power outlet.
2. Plug the other end of the charger into the jack
located on the lower edge of the phone. There will
be a message about a charger being connected
displayed on the display screen, and the battery
icon will keep blinking until the battery is fully
charged.
3. When the battery is fully charged, unplug the
charger from the power outlet, and then
disconnect the charger from the phone.
To Next Page
Loading...
Need help?
General
