EasyManua.ls Logo

Maxcom MM426 - Memory Status; Phone Calls; Direct Dial; Dial Phone Number from Phonebook

Maxcom MM426
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
the phone number from the Phonebook, and press the
green receiver again.
6.8.2 Memory Status
This option allows you to check the memory status on
the Card and the phone.
Select in MENU->Phonebook->Options->Settings-
>Memory Status.
7. Phone Calls
Direct Dial
1. Dial the phone number you want to call.
2. Press the green receiver to call the dialed number.
3. To end the phone call, press the red receiver.
Dial Phone Number from Phonebook
In standby mode, press the red receiver to go to the
Phonebook. Use the key UP/DOWN to mark the Contact
you need. If you want to quickly go to a Contact whose
name starts with the letter U, press the key 8 twice. To
call the marked phone number, press the green receiver
twice.
To make a phone call internationally, entering„00”
or „+” prior to an actual number is required. To
enter „+”press the key ” twice.

Table of Contents

Related product manuals