- Keypad Alert
- Keypad Volume
- Warning Alert (eg. low battery alert)
In standby mode press and hold the key # to enable the
profile Meeting, press and hold the key # again to return
to the previous profile.
Phone Settings
12.2.1 Date & Time Settings
To set the date and time, select in MENU: Settings-
>Phone Settings->Time & Date. Select „Time Zone” to
select a city you want, and then select „Set Time/Date” to
enter time and date. Use the key UP/DOWN to navigate
between the time and date. To enter time and date use
the keys 0-9.
You can also set the time format (12h or 24h), and date
format (DD/MM/YYYY, MM/DD/YYYY or YYYY/MM/DD).
If the battery was removed from the phone, after placing
it back you will have to set date and time (if it is not
automatically updated from the network).
Option „Update After Time Zone Change” allows you to
enable the function of automatic time update after time
zone has been changed.
Option „Auto Time Update” allows you to select whether,
after switching on the phone, the time should be
automatically set, after confirmation only, or not be set at
all.
To Next Page
Loading...
