EasyManua.ls Logo

Maxcom MM426 - Getting Started; SIM Card & Battery Installation

Maxcom MM426
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Any repairs or modifications of the phone on your
own are not allowed. Any problems should be
repaired by the qualified service only.
Use only original batteries and chargers. Using other
accessories might damage the device or cause an
explosion.
The phone is not dustproof; never expose the phone
to dust, metal chips, etc., as such an exposure might
cause the phone to malfunction.
WATERPROOF The phone is NOT waterproof.
Keep it dry at all times.
2. Getting Started
Prior to switching on the phone, a SIM Card should be
installed. Pay careful attention not to damage the SIM
Card while inserting it.
Keep SIM Cards away from children.
SIM Card & Battery Installation
The telephone has two slots for SIM Cards: miniSIM and
microSIM. If you have a card of different size, and there
is no option to adjust its size to the microSIM, go to your
Service Provider to replace this card with a Card of right
size.
Prior to inserting the SIM Card make sure the phone is
switched off, and the battery is removed. The charger
should be disconnected. To insert the SIM Card, the
battery must be removed first, as described and shown
in the illustration below:

Table of Contents

Related product manuals