EasyManua.ls Logo

Maxcom MM426 - FAQ (Troubleshooting)

Maxcom MM426
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
- plug the other end of the USB cable into the USB port
in the computer
- there will be a message on the display screen: „USB
Memory” and „Port COM”. Select „USB Memory”.
14. FAQ (Troubleshooting)
Only qualified service is authorized to repair the phone.
Any attempts of unauthorized repair and modifications
void the Manufacturer’s warranty!
„Cannot make
a phone call”
Make sure the number you are dialing is
correct. If you make an international
phone call, dial a country code before the
actual number (eg. 0049 or +49 for
Germany).
If you have a prepaid card, make sure
there are sufficient funds available on the
card to place a phone call.
“SIM Card in
place,
emergency
calls only
(112)”
Make sure the SIM Card is installed
correctly or it is enabled in MENU.
“The phone
does not
work, the
phone does
The phone might be switched off; to
switch on the phone, press and hold the
Make Call (red receiver) key for about 3
seconds.

Table of Contents

Related product manuals