What to do if my MAXDATA M-BOOK 600 isn't charging devices via USB when off?
If your MAXDATA Laptop isn't charging a device via the powered USB port while off or in Sleep Mode (but connected to AC/DC or battery above 20%), it's likely the port isn't powered. Use the Fn + power button combination to toggle power to the port. If it still doesn't work, especially with some external USB devices, turn the computer on to charge the device.
How to enable Wireless LAN/Bluetooth/3.75G/HSPA modules on MAXDATA M-BOOK 600 Laptop?
If the Wireless LAN/Bluetooth/3.75G/HSPA modules on your MAXDATA Laptop are not being detected, the modules may be turned off. Check the LED indicator or function key indicator. If the LED is off, press Fn + F11 (WLAN), Fn + F12 (Bluetooth) or Fn + (3.75G/HSPA) to enable them.
Why does the WLAN module on my MAXDATA Laptop turn on automatically?
If the WLAN module on your MAXDATA Laptop turns on automatically after being turned off, it is because the computer entered a power saving state with the WLAN switch in the ON position. The WLAN switch position controls the power status of the WLAN module at startup and when resuming from a power saving state.
What to do if Bluetooth is off after MAXDATA M-BOOK 600 wakes from sleep?
If the Bluetooth module on your MAXDATA Laptop is off after resuming from Sleep mode, use the key combination (Fn + F12) to power on the Bluetooth module.
To Next Page
General